Unsung Heros of NID: An interview with a carpenter

NID History from the grassroots: Nathalal Vavadia speaks about his journey at NID

Prof M P Ranjan

NID is approaching its 50th year since its inception in 1961 and there are many official events and activities that are being planned to celebrate the arrival of the landmark year. Here on this blog we have started an unofficial but sustained effort to try and look at all kinds of people who had contributed to the making of this great institute at Ahmedabad and from these glimpses we hope to shape a more complete view of the making of NID. Nathalal Vavadia who retired today speaks about his experiences and we will try and bring many more such interviews in the days ahead.

Image01: Nathalal Vavadia in various moods during a brief interview today, the 30th June 2010, the day he retires from NID after serving as a carpenter in the wood workshop for 40 years.

Nathalal Vavadia: Carpenter at NID remembers the good times from Ranjan MP on Vimeo.

Image02: Video interview with Nathalal Vavadia. Duration 12 minutes.

Nathalal Vavadia joined NID in 1970 as a carpenter in the wood workshop. He contributed to the NID building work as well as in producing the furniture designed by George Nakashima which was produced in batches at NID through the 70's to the 90's.

He remembers the people at the workshop and the intense work culture at NID during his tenure at NID. He retires from service today, 30 June 2010 and in an interview here he shares some of his experiences and insights on the history of NID as a centre of excellence. The interview is in Hindi but it provides a glimpse of what NID was in the 70's and 80's and provides some insights into the work culture of the institute in those days.

Prof M P Ranjan

First Descent of the Loop on the Youghiogheny River...on an SUP

The last time I was standing at Cucumber on the Youghiogheny River

I know I know, I used the oldest trick in the book to peak the interest.  A typical Youtube attempt to lure you in with the title of the article.  But I can promise you photos and videos of Andy and I crashing through the Loop section of the Youghiogheny.  We did manage to stand up through most of it but there was a little action for sure.  I just plain chickened out at Cucumber.  I had a bad line going so I just knelt down so I wouldn't land on a rock from standing cause that would hurt.  In fact I braced up off a rock at the bottom of the rapid while kneeling.  Theres a pretty good shot of it in the video.  Andy on the other hand tried to stick it standing and it looked like he had a shot at it... and then... he fell down.

When things go bad

Andy Hanging Tough at Cucumber

Andy had been trying to get out on the Loop on SUP this summer but was getting rejected by the State Park, because the river is restricted for inflatable craft.  They must have at least 3 air chambers in case one fails and the only boards people were trying to take down were single chamber inflatables.  So that left Andy one option to Stand Up, other than Striding of course, The Versa Board.  So we went for it.

The Lower Yough is a classic class 2-3 stretch that has some technical rapids at the level we were paddling.  Its amazing the difference paddling boards in class 2, and class 3.  When you add that extra level of manuevering and diagonal waves and holes it makes stand up paddling much harder.   I do think that anyone can paddle class 1 and even easy class 2 on an SUP but when you have to start reading the river and dealing with more complex currents it gets really really hard.  Which is a great challenge for experienced paddlers but could leave newer paddlers very wet.

It was a great day and weekend visiting Andy and Erica at Riversport and enjoying the community that is hanging out at the Lucky Dog Cafe in Confluence Pa.

Big Thanks to Erica, Andy, and the crew at Riversport and the Lucky Dog Cafe

  

Here is the video I promised.  Later Shane

plus a few more photos

I Rolled, I Rolled!

Last night I taught the second half of an introductory kayaking clinic at Erindale Lake (a local suburban pond). After the class I decided to spend a little time out playing on the water. I went through some of the exercises described in the book Sea Kayak Strokes by Doug Alderson (I have access to an online version through the library at my workplace). These exercises had me progressively building the motions to perform a kayak roll, with a paddle float on my paddle throughout. Initially I was in a high brace, then laid on the back deck while in the high brace, then moving my body out beside the kayak, then eventually tipped right over and moving back to the upright high brace position. This progression of movements worked very well for me and allowed me to work toward building these motions into my muscle memory, so that they can hopefully become automatic. The next step was to be completely upside down, then using the paddle (with paddle float) to get back to that upright high brace position, rolling the kayak underneath me using my hips and trying to keep my centre of gravity low and remembering to bring my head up last. Rolling up from completely submerged proved quite easy when done this way, however I was still reliant on the paddle float so was cheating.

I'll be heading out to practice again soon - this time I'll be focussing on reducing the amount of pressure that I'm putting on the paddle float. Hopefully Jay can come out with me and we can work through some of the exercises together. With any luck, after a couple of sessions we'll be rolling our kayaks without the cheat of using the paddle float.

If you have any tips or tricks, please leave me a comment!


See an update at this link!

Mathcad 15 Available from CADDIT Australia

Mathcad 15 is now available from CADDIT Australia. According to the official release, "Mathcad 15.0 includes over 25 new functions, more robust reference libraries and integration with third-party tools, including the latest version of Microsoft Excel. Additionally, the Mathcad 15.0 integration with existing engineering platforms like Pro/ENGINEER®, as well as with PTC’s Windchill® solutions, Windchill PDMLink® and Windchill ProductPoint®, enables better management of critical engineering content, making it easier to share and reuse information leading to standardization and best practices." More than three years have passed since Mathcad 14 was released in the beginning of 2007.

Some new features in Mathcad 15 include:
• Mathcad 15 is Windows 7 compatible (officially supported on Windows7)
• Design of Experiments (DoE) – Over 25 new functions to reduce the time and expense of conducting experiments using DoE.
• Data link for the latest versions of Microsoft Excel® – Mathcad functions include READEXCEL(), WRITEEXCEL(), READFILE, an Excel data import wizard and an Excel Add-in.
• Integration to Knovel® Math content – (more information below).
• Integration with Kornucopia® software – Reduce time and effort spent on analysis by providing functions and templates using Mathcad-based documented workflows. Improves interpretations and value of experimental data and simulation results.
 
A complete product brochure for Mathcad 15 can be downloaded HERE.

Mathcad 15 license options are Individual node locked or registered user, Floating (network) and Global. Node locked licenses are fixed to a specific PC, floating licenses can each have one user at a time, by anyone on a local network (i.e. three network users all using Mathcad at the same time will need three floating licenses, etc) Schools and universities may also choose from the Student Edition, Professor Edition (node locked) and University Editions (floating). The Single User license will be effectively discontinued.

All PTC active support customers now receive:
• 24x5 technical support
• No charge access to all software updates and upgrades
• Access to the Knowledge Base which includes searchable product specific content and resources
• Discounts on product level upgrades
• Online web support and License Management tools
• “Tips and Techniques” web casts for product demos and basic training
• Gold Loyalty Program discounts with partners including Dell, Knovel, Lenovo.

In addition to the above, Mathcad customers are also entitled to:
• An additional license at no charge to be used on the Home PC of a user utilizing a network license in the office.
• Node Locked customers receive 1 Home Use License for each active license
• Floating customers receive 2 Home Use licenses for every 1 seat they maintain.
• Up to 10 Free content downloads from Knovel (more information below). Mathcad customers will particularly be interested in Knovel Math which provides fully documented Mathcad worksheets from Roarks Formulas for Stress and Strain- 7th Edition, Hicks Handbook of Civil Engineering Calculations, and the Foundation Engineering Handbook.

A new partner for updated Mathcad Extended Libraries:
With past versions, PTC Mathcad included Library Extensions for Mechanical, Civil and Electrical engineering. PTC has a new relationship with content provider Knovel, who maintain updated library extensions for Mathcad called Knovel Math. Those with Mathcad 14 can also use the old Library Extensions from that version on Mathcad 15, as well.

For more information about Mathcad 15 in Australia, contact a local partner HERE. A trial user version of Mathcad 15 is not yet ready. Mathcad 14 in Australia can still be directly downloaded from CADDIT.net HERE. Trial users from regions outside Australia should contact either their own local PTC partner or download the trial directly from PTC.

How Outsourcing to China will "Bring it Home"

Mei (name changed) is a Chinese factory worker who makes toys sold overseas. She works 12 hours except on Saturday when she is permitted to only work six hours. She lives in a small flat with her husband and one child. She was pregnant with a second but the local authorities forced her to have an abortion. For two years she managed raising their living child alone, because her husband was being detained under suspicion of having ties to a certain religion. This is not Hollywood, this is nothing remarkable, this is common people's life.. in mainland China.

The phenomenon of outsourcing to China took on a complete new dimension in the USA, with the sudden success of what some consider the single largest retail scandal in American history - Wal*Mart. According to the PBS documentary STORE WARS: When Wal-Mart Comes to Town:

Made in the U.S.A? Despite a well-publicized "Made in the U.S.A." campaign, 85 percent of the stores' items are made overseas, often in Third World sweatshops. In fact, only after Wal-Mart's "Buy American" ad campaign was in full swing did the company become the country's largest importer of Chinese goods in any industry. By taking its orders abroad, Wal-Mart has forced many U.S. manufacturers out of business.

(note the above recording of Wal-Mart's 1992 television ad "Bring it Home to the USA" was removed from YouTube several weeks after this article was published)

Most Americans never saw past the red-white-and-blue logo of this seemingly phony patriotism. Wal*Mart stock price skyrocketed with its success. Wal*Mart would ultimately get away with "selling the American economy" to Chinese elite on an unprecedented scale. Other retailers - by choice or by necessity - also increased Chinese imports. The Chinese elite came to understand that a great weakness of their western counterparts was the overwhelming self-centeredness of some. And as Wal*Mart showed everyone, you only need some. Convince one to outsource - two more follow. Others resist, but as their own products loose markets to cheaper competition, they too are soon forced to follow suit in a massive avalanche of outsourcing. This flood of new low-cost, low-quality product to store shelves also fostered a new "use up and throw away" mentality in people, which produces more waste and garbage.

But it gets worse. In early 2009 Secretary of State Hillary Clinton signed a collateral agreement in Beijing which grants China the right to claim Eminent Domain of LAND within the USA as security for all the debt this has helped cause. America has now quite literally - and quietly - mortgaged itself to China, and most people living there don't even know. Americans can partly thank their local Wal-Mart - after all - "They Care", as their carts say. All of this for the everyday low price of cheap tube socks and $2 a day paid in sweat shops that nobody else had to look at. So, for those who want to move to China, there is good news. We just keep outsourcing to China, and China will be brought to us.

London Festival of Architecture

Picking up on Simons blog article about the London Festival of Architecture, we at HOK London have also got involved!

 

We’ve greened our office and given our atrium area a village green theme along with real grass! hmmmm doubt it will last a week. :-)

Revit Architecture 2011 webupdate 1

This sneaked its way on to the internet yesterday…..

http://updatesdl.autodesk.com/updates/files/autodesk_revit_architecture_2011_update_1_readme.htm

The link below is for the 64bit:-
http://updatesdl.autodesk.com/updates/files/rac_x64_ur10.exe

For 32-bit go to:-
http://updatesdl.autodesk.com/updates/files/rac_x86_ur10.exe

Saturday Sunset Co-op

Lee over at awholebunchofings.blogspot.com has come up with an interesting idea. He is encouraging paddlers to head out on Saturday evening (or dawn) and photograph the sunset (or sunrise). Paddlers can then send their photos in to him, and he'll post the likely splendorous results.

Lee says:
So here's what I'm askin:

• Spread the word! feel free to copy paste/ link/feed etc this elsewhere!!
• Saturday head out on the water; all day till sunset or 5 minutes prior.
• Take a pic of the bow of your boat and the sunset
• Come home later that night fire me a email with your pic.
• Sunday log in to [Lee's] blog and HOPEFULLY see pics of the same glowing globe setting from other paddlers perspectives across this wonderful world we live on.

I don't think I'll manage to participate, unless I get up really early to go for the sunrise option (sunrise this morning was at 4:45 am). However, I think it's a neat idea so maybe a few folks who see it here will agree and participate.

A sunset photo from last summer on Kingsmere Lake.

Versa Boards on the Hiawassee River

Woody, Adriene, Maria, and I rambled over to Eastern Tennessee to take a trip down the Hiawassee river on Stand Up Paddle Boards.   The river was perfect for SUP, great sceneary, some whitewater, a little wildlife, and the water was cool because it comes from the bottom of a lake but it felt great on what was a really hot day.  We were joining a bigger group of SUP folks cruising the river.  It was the most people stand up paddling down a river that I had ever been a part of.   Awesome day.

Hanging on in the Island Rapid!

Surfing a huge gnarly wave on the Hiawassee!

Team V for Versa Board.

Here is a new radical trick I am working on for the Versa Board.  Thanks Maria

Here are a bunch of photos that Maria took of our trip.

Cheers
Shane

Slow-Witted Prey Floating in Oil

Click the link for the full sized Yehuda Moon!

"Alibre Design Personal" Replaces Standard & Xpress versions; New Alibre Products

Alibre is a powerful but easy-to-use 3D mechanical CAD package which is distributed and supported in Australia through CADDIT.net. Beginning in mid-May, Alibre no longer offered a "Standard" version of their CAD software. Alibre Design "Standard" has been replaced with the Alibre Design "Personal" version, mainly for hobby use. Also, the free version referred to as "Alibre Design Xpress" will no longer be available to new users. Current users of these products, however, should be able to continue using them as-is without any change to their software. A note to those who purchased Alibre Design from us during our last promotion, well done - you have a package worth about $1000 for under $200. Alibre Design Personal now has some new limitations in comparison to its predecessor, Alibre Design Standard:

• Single install license (no take-home license, multiple keys etc)
• Advanced Import / Export features are deactivated
• Import DWG / DXF is still enabled
• Export .STL is still enabled for 3D printers
• Publish 3D PDF (for models only) is still available
• No STEP, IGES, SAT, Rhino, image files
• Files are not enumerated unless you select All files (*.*)
• Turn-off Advanced Detail Drawing (see further..)
• No Bill of Materials
• No Detail, Section, Partial, or Broken views
• No views for Centers, Cosmetic Threads, External Threads, or No Hole Call-outs

CAD users looking for competent 3D mechanical CAD software are really encouraged to at least go with Alibre Design Professional now. Algor DesignCheck FEA is now called "Simulation Express" from Autodesk and will continue to be available as before. Alibre also has a new partner for delivering photo-realistic rendering to all Alibre Design Professional and Alibre Design Expert users. Luxion's KeyShot For CAD is now included in both versions and is available in Australia from CADDIT. Other Luxion users include PTC, Cadkey, SpaceClaim and Rhino. NOTE Alibre expects to also have new KeyShot BIP file export enabled within Alibre Design by the end of June.

KeyShot For CAD allows Alibre Pro and Expert users to create full photo-realistic images for their model within minutes. And - much like Alibre itself - Keyshot is easy to use. Drag-and-drop materials, preset lighting, and real-time updates give you the final result all the time. KeyShot is the first and only rendering application that offers real-time ray-tracing. This means that your model is constantly being rendered as you zoom, pan, rotate, and apply materials and lighting presets. For more information about Alibre Design 3D CAD in Australia feel free to CONTACT CADDIT.net. A free 30-day PROFESSIONAL trial of Alibre Design can be downloaded HERE.

Instructor's Course Guest Starring Michael Pardy

This will be a very short post because I'm darned tired. I just finished a Paddle Canada "Kayak Instructor Introduction to Kayaking" course. It was a three day course, running all day Friday, Saturday & Sunday and included classroom sessions, on the beach sessions, and lots of paddling (at Pike Lake). The course was operated by Viki of Kingston Kayak Instruction. Viki is herself becoming certified as qualified to teach instructors so had Michael Pardy here assessing her. Viki is a very good instructor and I've enjoyed her courses in the past, but having the added element of a paddler and leader of the caliber of Pardy here in Saskatoon was something remarkable. I only wish I could have taken even greater advantage of that resource. Although right now I feel burned out from the sun (a rare thing here lately) and being on the water, I would have eagerly taken a few more hours of his time if I had the opportunity.

I'm proud to say that I have received a conditional pass (as did all 6 of us in the course), and following the submission of my yet to be received homework assignments, will be officially a flatwater kayak instructor qualified to teach the Paddle Canada Introduction to Kayaking 8-hour course.

New progeCAD 2010 10.0.8.9 Released from CADDIT; Automatic Upgrade for Current Users

progeCAD 2010 Professional 10.0.8.9 is available from CADDIT with several more small bug fixes for issues reported from our forum, customer and user feedback. These fixes include:

- Fixed "copy as block" when name is already defined in the destination drawing
- Fixed a hatch display regen bug
- Fixed polar Lisp function
- Wblock file format now uses system DWG default version (2007)
- Fixed point dragging when ORTHO and ESNAP are On
- Occasional crash on auto-save issues have been addressed
- Fixed memory leaks found with the MIRROR command
- Fixed some issues with display of some non-Latin characters
- Fixed graphics visualization issue after REDO

Current progeCAD 2010 users also having an Internet connection will be upgraded automatically if the automatic update tool is enabled. No manual download will be necessary when the update works in that case. On some systems it may be necessary to first login as administrator before this update can be performed.

Other CAD users are encouraged to download this latest as a version free trial. progeCAD 2010 Professional will run for 30 days before users can choose to license it or not. Current license options for progeCAD include single-seat, floating network licenses, mobile USB, large office licenses and more. SME small and medium enterprise may also inquire as to our quantity discounts for 5- 10- and 20-license packs. progeCAD is free for schools who join the CADDIT progeCAD educational program in Australia and New Zealand. Other questions about progeCAD software can be directed to our support office in Liverpool, Australia.

The Pilgrimage to Oh Be Joyful Creek

Oh Be Joyful creek is a pilgrimage for paddlers every year.  It has all the makings of mecca for paddlers.  If the season in the Crested Butte valley were a couple months longer there would be 100s of paddlers moving in for the summer but because the season is only a few weeks long it has the feeling of a carnival camp with new members rolling in daily and a frantic pace of paddling and partying up and down the valley.   Camp itself is an awesome scene.  Its a beautiful spot directly at the base of the Oh Be watershed with the Slate River flowing by.  Just upstream is Daisy creek and up the valley from camp is a fantastic view of the mountains of Gunnison National Forest and the snow pack that promises the next days adventures.

If you haven't paddled continuous fast pace stuff your first time on Oh Be can be disconcerting at best.  As you walk up the run, earning every turn, you see lots of slides and fast paced whitewater.  The 9,000 foot elevation makes the eddies look very small and the holes look bigger but as the light headedness dissipates and the first run is under your belt the butterflies calm and you become more comfortable.  Most folks do a few laps on the first walk up from camp.  Two things happen during the session.  You as a paddler get more comfortable and the river begins to rise.  The morning runs are often a little bonier and the evening runs can get downright juicy.  And as the paddlers come down off the mountain side the excitement is intense.  The stories are of all kinds.  First timers are jacked with adrenaline and excited about how fast and long the last slides are or how sick their line off the big drop was.  There is goodness for the old pros and the setting itself is different from just about any river you will ever paddle.  There are stories of whoa from missed lines, tortured gear, and drowned vehicles that didn't quite make the trip across the Slate river.  This year in the first 36 hours we were in the area 3 vehicles were stuck in the river while trying to cheat the hike up to the put in.  I did climb into one rig that was stuck mid river to have dinner and a couple shots.  It was a pleasant mid river camp spot but expensive I think.

The Glorious Ride Across in the Morning.

The Unfortunate Aftermath in the Evening

Even putting in on OBJ is a different experience.  You have a couple choices.  One option is to put in above a drop called Ankle Breaker which is fun but it does land in 3 feet of water (not many people do this).  The other option is to put in, I kid you not, 15 feet and 4 to 5 paddle strokes above a good 15 foot drop that they call the 18 footer.  Fortunately you are well warmed up and light headed from the hike up the valley, or holler as we call it here in the Appalachians.  From there the river is pretty much non stop with small eddies and lots of willows overhanging the banks.  We coined a new phrase this time up..."willow turns".  There are times instead of doing eddie turns you have to do a "willow turn" to stop and set safety.  Here are a few shots and a slide show as well as a link at the bottom to 100 shots of our stay at Oh Be Joyful.

Cheers
Shane

Put In Above the "18 Footer"

The 18er

The 8 footer

Grace Stylin' the Big One

Headed back to Camp

Versa Board down Gore Creek in Vail, Co.

The last couples weeks has had me traveling in Colorado for a couple events and a couple rivers.  This past weekend I was helping at the Teva Mountain Games with the Extreme Race down Homestake Creek and the Freestyle Event in the middle of the Vail Village.  I also signed up for the SUP surf cross sprint down Gore Creek which is the first time I have entered any kind of an event on a stand up paddle board.  Its also the first time that I have run a river that I hadn't first run in a kayak.  So it was a personal first descent for me and my Versa Board.

Theres a video at the bottom of the story.

 Gore Creek is very continuous especially at the levels we were on it.  The video is from the day before the race.  The water came up several hundred CFS the next morning for the sup race which made all the waves bigger and the whole section much more continuous.  There were a couple of solid class two drops that were made more difficult by low hanging bridges.  Its one thing to stand up down rapids but to also duck under bridges, pipes, and trees makes it more like a class 3-4 experience.  The first trip down was pretty uneventful.  I managed to not fall in at all but I could feel how tired my legs were after three and a half miles of maintaining my balance and paddling.  Lets just say it was a good workout.

The race went well.  I finished 16th out of 39 guys. The water was much higher during the race and the waves and rapids were a lot bigger.  I fell 3 times I think mostly because I was exhausted.  When I stepped off my board my legs were shaking and my arms were tired.  It didn't help that we were racing at 8000 ft.  It was a great time and I will do it again.  One of the cool things that happened during this event was that a team of Hawaiian SUP racers flew over for the event.  Of course they came and kicked all our asses but they also brought a good vibe.  Before the race they handed out shell necklaces to everyone and asked us to remember the things that were important.  They wanted everyone to look out for each other and remember that just paddling and friends were what it was all about.

I hope you are all getting out on all the water.
Shane

Here is a video of the session on Gore Creek on the Versa Board.

Free Pro/ENGINEER Tryout Edition DVD from CADDIT

A new free PTC Pro/ENGINEER Wildfire DVD software kit is available in Australia for evaluation from CADDIT Australia. This free "Pro/ENGINEER Experience" kit includes an interactive tutorial DVD (disk #1) and an easy-to-register 30 day full evaluation version of Pro/ENGINEER software (disk #2). Pro/ENGINEER is a high-end 3D modelling, manufacturing and simulation PLM (Product Lifecycle Management) platform used in industrial and product design, automotive and aerospace, marine and manufacturing for delivering a total single platform which can scale to meet the needs of any design requirement. Some of the improvements in Pro/ENGINEER Wildfire 5.0 include:

• Completely new 2D detail drafting environment (this was first revealed on our blog here). The new framework uses the ribbon-like Fluent UI command navigation from Microsoft. Improved plot preview and use of Adobe TrueType fonts in text.
• New social product development capabilities using Pro/ENGINEER’s brand new ProductPoint^® platform, built on Microsoft^® SharePoint^® to better enable design teams to work together.
• Enhanced Weld Design - New weld features, symbol annotations, and simulation enhancements enable you to design, document and analyze welded structures. You can analyze weldment models up to 10X faster, shown below:

• Realtime photo-realistic rendering with raytracing support for shadows and reflections. Pro/ENGINEER Advanced Rendering Extension (ARX) now includes the mental images rendering engine for unsurpassed realism.
• Machine simulation can drive slot motor components along curves, quickly create belts to account for kinematic and dynamic coupling, analyze dynamic gears, and model 3D contacts. More high-end analysis capabilities with expanded support for heterogeneous units, improvements to icon and label displays, an intuitive dashboard UI for surface and volume regions, and support for materials plasticity.
• Improved 5-axis CNC machining quickly and easily duplicate tool paths and leverage the process manager for turning operations, such as area turning, grooving and profile turning.
• Exchange Autodesk Inventor® and SolidWorks® files, including non-geometric data exchange capabilities - you can preserve 3D notes, annotations and metadata in neutral formats. And the new 3D import wizards and usability enhancements for AutobuildZ™ and Import DataDoctor™.
• Improvements in speed, ease of use, completely new Pro/ENGINEER Spark Analysis and Manikin Extensions, a new "Rib Tool" for plastic part design and many other enhancements...

This DVD kit is a valuable, limited time opportunity for companies to have easy access to the latest parametric CAD design technology in Pro/ENGINEER Wildfire 5. For those interested in data management and the new Social Product Development technology, a chance to work with a live ProductPoint PDM server will also be provided. Special discount prices for Pro/ENGINEER licenses are also available until the end of June.

Australian SME (Small and Medium Enterprise) companies, individual company staff members or management can request this kit from CADDIT HERE (Australia only). In other countries you may need to contact your local PTC partner or contact PTC directly.

Getting ripped off

Now I think I’m a reasonably relaxed sort of guy (my wife would probably say different! :-) ) But a good friend of mine passed this link to me today. It would seem somebody has been passing off my blog articles as theirs. They do at least make reference to the source.

http://revitinfo.com/Revit_Forum/Entry_Details/EntryID/223.aspx?&getindoolabinfo=aboutlink

Whilst I’m not that precious about what I write about, I little bit of credit or just a quick email to say, “hi, you ok if we link to your article?” wouldn't have gone a miss. Now I would probably say no problem, just make reference to who wrote the article. I remember Steve Stafford highlighting a similar issue around 12 months back and he wasn’t exactly thrilled by it then and either am I.

Fancy Schmancy Peanut Butter Jars?

Sammy over at Gearpods.com recently got in touch with me about sending a sample of their product my way for testing. Probably I could have considered his post on the blog as spam, but I was intrigued. "That's a fantastic idea" was my quick response. At least, that's how I responded after figuring out what a "Gear Pod" is.

You see, I received Les Stroud's book Survive! a while ago as a gift. Since then, I've been meaning to put together a survival kit (or perhaps multiple kits) in a waterproof container. The kit would come in handy if I (or the folks I were paddling with) were separated from my gear or had some sort of emergency that left us stranded. My container of choice so far: a plastic 2kg peanut butter container (sans peanut butter, even though that in itself would be a useful survival item). The kit would contain a variety of means of starting fires in adverse conditions, some means of providing shelter (a sheet of plastic or an emergency blanket, either of which would have multiple uses), signalling devices, and a variety of other useful items (fish hooks, wire, string, fish line, safety pins, bags, tape, button compass, etc.). I tried and the peanut butter container can be squashed into the bow or stern of my Swift Yukon canoe.

So, back to Sammy and Gear Pods. These Gear Pods are essentially, waterproof containers to do the same sort of thing I had in mind for the peanut butter jar, only they are intended to be more versatile and tougher. They also cost a bit more (it's hard to compare prices to free recycled plastic jars). They sell the Gear Pod jars either empty in a variety of sizes, or as part of pre-packaged kits. Some of the kits are specifically survival-oriented, while others are first-aid, shelter, or food oriented.

Sammy has my address and has promised to send me samples to test out over the coming months. I don't actually know anything more specific about what is being sent but I look forward to putting the Gear Pods to the test over the summer. I will have the opportunity to take them north to the shield and boreal forest of Saskatchewan, and out to the saltwater of the West Coast, and next winter, into the extreme cold of a Saskatchewan winter. So, stay tuned for updates and eventually a Gear Pod review!